Microscopy labs

…stick to a standard beamtime allocation at 1.5 GeV ring, where beamtime begins 0900 Wednesday and ends 0900 the following Monday. When writing proposals, request and plan the following 4…

Experimental station

…sample in exchange gas, MAX IV design In operation yes LN2, sample in vacuum with heating Later in-situ cells Linkam, 1000oC furnace and controller In operation yes Catalysis gas-flow cell,…

Pre beamtime

…lab page. Support labs If you want to book a lab directly, you can enter your MAX IV login on our booking site here. Book lab Remote access It is…

Before you arrive

…overview on our Support labs page and clicking the lab you are interested in for further information. If you need a guide on how lab-booking works, look up the User…

Balder Lab

…water Millipore, Direct-Q 5, Type 1 water Additional support labs Several on-site labs are available for more extensive sample preparations For general information about the biological, chemical and microscopy support…

Step-by-step guide

…Guide. 1 Contact the industry office We will discuss your research needs, guide you through the experiment process, and arrange a meeting with our beamline staff to go through experimental…

Full field imaging

…275 nm, with an initial field of view limited to the natural beam size at the sample position, approximately 1.2 x 1.2 mm². A larger field of view at the…

User information

These following items are available to use: 800 nm pump laser; OPA pump 1600 nm – 400 nm; THz generated in organic crystals. 1.8-15 keV X-rays 80 Gs, 36 GHz…

SCIENTÍFika hosting Dr. Georg Held

…routinely up to 30 mbar. A small NEXAFS endstation is separated from the beamline by a window and allows pressures up to 1 bar. The talk will discuss the beamline…

LINXS Christmas Open House

Join LINXS at our first Open House and Christmas glögg-mingel on 15th December! When: Drop in at any time from 15.00 to 18.00 Where: LINXS, Scheelevägen 19, Lund, at the…