Prepare samples for the Sample Exchanger
The MAX IV sample exchanger currently supports only samples mounted in UniPucks. UniPucks can be purchased from a number of vendors, but there are also some available at the beamline….
The MAX IV sample exchanger currently supports only samples mounted in UniPucks. UniPucks can be purchased from a number of vendors, but there are also some available at the beamline….
In the laboratory we have different types of magnet power supplies Itest corrector power supplies bipolar, output power +- 100 watt CAENels output power 0,4-1,5 kilowatts Delta Elektronika output power…
Join LINXS at our first Open House and Christmas glögg-mingel on 15th December! When: Drop in at any time from 15.00 to 18.00 Where: LINXS, Scheelevägen 19, Lund, at the…
Photon energy 260 eV – 2500 eV (maximum range) 260 eV – 1800 eV at > 1012 ph/s Resolving power Up to 35000 Spot size 60 µm (h) x 25…
…pinhole (in the black, drop-shaped holder) before it hits the sample (held from the bottom) and then enters through the window into a 15m long flight tube. Credit: Maik Kahnt Publication…
…X95 rails and carriages and can be removed/replaced for other equipment if needed. DanMAX beam conditioning unit. Beam enters from the right sides. An evacuated flight tube is used for…
…(as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as can be done with the mobile ICE endstation). Here is a…
FEA Analysis of ForMAX flight tube. Our primary tool is the CAD software we use. Primarily we are using Solidworks for 3d modelling complemented by Ansys for different FEA analysis….
…or surface reaction are projected by a combination of electric and magnetic fields onto large area position sensitive detectors. From the measured time-of-flight of the particles and their position of…
…mirror analyzers (as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as will be used with the mobile ICE endstation). Here…