Prepare samples for the Sample Exchanger
The MAX IV sample exchanger currently supports only samples mounted in UniPucks. UniPucks can be purchased from a number of vendors, but there are also some available at the beamline….
The MAX IV sample exchanger currently supports only samples mounted in UniPucks. UniPucks can be purchased from a number of vendors, but there are also some available at the beamline….
…changes to the data directory while transferring and verify that you have read access to all files. 1. Log in to Globus Go to the Globus website: https://app.globus.org/ Select your university/organization…
…However, this change involved removing the capability to make two electrical contacts at a specific azimuthal angle. Biasing of the entire sample with respect to the analyzer remains possible. The…
…change the password, you will have to create a new connection to be able to log in again. If you can connect to the office network vpn-white, but not the…
…a change in applied voltage to a (solid) electrode interface, produced a change in the electrochemical potential of the (liquid) electrolyte. The study follows earlier work by the group at…
…based sample delivery systems. The sample changer can store up to 464 SPINE sample holders and automatically exchange these under cryo-conditions. The detector stage will have two area detectors, an…
…time-of-flight mass spectroscopy, and Photoelectron photoion coincidence spectroscopy. Atmospheric research FinEstBeAMS warmly welcomes the atmospheric research community. Presently, studies of gas-phase and liquid samples are possible, while a sample delivery…
…Sc-containing complex oxides at FinEstBeAMS” – Dmitry Spasskiy, University of Tartu (EE) 10:50 “A new sample delivery system for x-ray photoelectron spectroscopy studies of in-flight aerosol and free nanoparticles” –…
…pair of precision exit slits (spatially separated H-focus and V-focus) on each branch Chopper A retractable chopper is planned to be installed in 2019 on the gas-phase branch for Time-Of-Flight…
…(as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as can be done with the mobile ICE endstation). Here is a…