Practical information

…participants must apply for their own individual Access cards: Link to guide All participants must also make sure they have a valid Safety Test result (check the dates!) and print…

Inspecting Processing Results using EXI

…anomalous difference is detected between Friedel pairs, experimental phasing is attempted. In this case, the fast_dp results will also contain links to the phasing results from fast_ep. Links to experimental

Data access and processing

number in the /raw/ folder. /data/visitors/danmax/#Proposal/#Visit/process/recon/ Jupyter It is also possible to process the data in Jupyter notebooks, using either the normal MAX IV Jupyterhub (~8 cores, 100 GB of…

A record year for research at MAX IV

…proposals from national and international researchers who applied to use MAX IV this autumn. The total number of proposals submitted in the 2023 Open Calls (717) was 14% higher than…

Prepare samples for the Sample Exchanger

The MAX IV sample exchanger currently supports only samples mounted in UniPucks. UniPucks can be purchased from a number of vendors, but there are also some available at the beamline….

In-situ plate experiments

…you have In Situ-1 plates contact us in advance, since it is not obvious where to set up the crystallization drops. The plate holder also can hold other plate types….

User information

…However, this change involved removing the capability to make two electrical contacts at a specific azimuthal angle. Biasing of the entire sample with respect to the analyzer remains possible. The…

Detector operations and support

…the L-shaped Dectris Pilatus, both for SAXS-WAXS experiments. We also operate many sCMOS cameras, including those from Andor and Hamamatsu. For the spectroscopy techniques we have a range of silicon…

Supporting X-ray techniques

In addition to the main methods of Balder, XAS and XES, we provide two secondary techniques at the beamline. Press the button below and you can see examples of XRD…