…time-of-flight mass spectroscopy, and Photoelectron photoion coincidence spectroscopy. Atmospheric research FinEstBeAMS warmly welcomes the atmospheric research community. Presently, studies of gas-phase and liquid samples are possible, while a sample delivery…
…motorized XYZ trolley inside the SAXS flight tube. The WAXS detector is mounted on an evacuated nose cone of the flight tube and the four modules of the WAXS detector have a…
…pair of precision exit slits (spatially separated H-focus and V-focus) on each branch Chopper A retractable chopper is planned to be installed in 2019 on the gas-phase branch for Time-Of-Flight…
…depending on the temperature range of an experiment: 1. Mo-based manipulator head for better heating. Radiative heating by filament (up to 800 °C), e-beam heating (up to 1200 °C, but…
…on resolution/spotsize Energy resolution 1meV at 21eV, 2meV at 63eV (measured, 800L/mm, 20μm exit slit) Gratings All user beamtimes so far have operated on a single grating (800 L/mm cPGM)…
…(as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as can be done with the mobile ICE endstation). Here is a…
…mirror analyzers (as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as will be used with the mobile ICE endstation). Here…
…Fäladstorget 14 Monday – Sunday 7am-10pm 2,4 km * Please be aware that opening hours can change on short notice due to national holidays etc. Location and transportation chevron_right MAX…
…IV. Credit: MAX IV Laboratory When deformed fast, the steel gets hot because of adiabatic heating, which changes the structure and properties of the material. Before the deformation, the steel…
…to protocol changes in Ivanti Connect Secure Server, a very recent version of OpenConnect is needed. Preferably version 9.01 or newer. Some distributions may be backporting these changes into OpenConnect…