Beamline optics
…is used to reduce the bandwidth of the X-ray beam and select the working energy in between 5-28 keV. At the SSA position the beam is cut to select the…
…is used to reduce the bandwidth of the X-ray beam and select the working energy in between 5-28 keV. At the SSA position the beam is cut to select the…
…create a room-temperature superconductor that can be used for broader applications. X-ray and neutron scattering results on the particular cuprate superconductor La2xSrxCuO4 will be presented in this colloquium, as well…
…the future as part of the Circular Economy. They are bio-compatible and can be recovered and re-used after the water has been cleaned,” says Alejandro and Alessandro. ReMade@ARI has a…
Dear Users and Friends of MAX IV MAX IV extends our warmest wishes to each of you. This year has been filled with challenges and significant achievements, and none of…
…phases that the steels would assume during deformation. The steels used in the experiments were commercial so-called Transformation induced plasticity or TRIP steel and metastable austenitic stainless steels. “The phase…
The analysis chamber hosts a VT XA STM (ScientaOmicron). The microscope has recently (2019) been upgraded so that non-contact AFM via QPlus sensors became possible. Most of our users run…
…500 mA Horizontal emittance 6 nm rad Vertical emittance 60 pm rad (can be adjusted based on user demand) Typical horizontal beam size at ID center 185 micron Typical horizontal…
…Nominal current 500 mA Horizontal emittance ~200 – 330 pm rad (depending on ID gap settings) Vertical emittance 2 – 8 pm rad (depending on user demand) Typical horizontal beam…