FineEstBeAMS beamline is equipped with the following attributes: Techniques X-ray Photoelectron Spectroscopy (XPS), X-ray Absorption Spectroscopy (XAS), Angle-resolved Photoemission Spectroscopy (ARPES), Photoelectron Photoion Coincidence Spectroscopy (PEPICO), Time-of Flight Mass Spectroscopy…
…µm thick Si sensor High-resolution Crytur camera, 2048 x 2048 pixels2, 600 nm effective pixel size Detector distance given by flight tube, approx 1-3.8 m Detector distance minimum 160 mm…
…is equipped with a Newport M-BKL-4 kinematic base for easy exchange of the sample holder. Both axis are compatible with fast continuous scanning (fly scans). Only one axis can be…
…using different harmonics. When the undulator gap is changed, the energy and the diffraction angle of the diverted beam changes accordingly. The second monochromator crystal will travel along a translation…
…note that potential hazards can change several times a week. Never enter a preparation lab or experiment area before contacting a beamline staff member. 3.3 Workshop area/vacuum laboratory (D-building) The…
…MAX IV computers available to users. Important: don’t change the file names or paths, which might break the internal data-links and also causes failure of most software. During the experiment,…
…change the password, you will have to create a new connection to be able to log in again. If you can connect to the office network vpn-white, but not the…
…tomography data is also saved in the DXchange format for straightforward processing using available scripts incorporating, e.g., TomoPy. This file is located in the raw folder with the name scan-####_dxchange.h5….
…a change in applied voltage to a (solid) electrode interface, produced a change in the electrochemical potential of the (liquid) electrolyte. The study follows earlier work by the group at…
…based sample delivery systems. The sample changer can store up to 464 SPINE sample holders and automatically exchange these under cryo-conditions. The detector stage will have two area detectors, an…