Sample holders
…or made from Copper but coated with Gold. The top of the pins can be modified to match the specific needs of individual samples. There are three different shapes/sizes of…
…or made from Copper but coated with Gold. The top of the pins can be modified to match the specific needs of individual samples. There are three different shapes/sizes of…
…(beam size down to 5 micrometer). NOTE: Automated rotational crystallography is still in commissioning and the experiment control in development. This functionality might not be ready in the beginning of…
R3 beam dynamics High-Chromaticity_Optics_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20090902_Updated_Lattice_120614.pdf Internal_Note_20100318_Updated_Lattice_120614.pdf Internal_Note_20100512_Pulsed_Magnet_Injection_120612.pdf Internal_Note_20101101_Updated_Lattice_120614.pdf Internal_Note_20101203_Magnet_Synchronization_120612.pdf Internal_Note_20110117_Updated_Lattice_120612.pdf Internal_Note_20111124_Updated_Lattice_120611.pdf Internal_Note_20121107_Updated_Lattice_140129.pdf Internal_Note_20130724_OCO_Modeling_141009.pdf Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat…
…on the same spot of the sample during the experiment, the researchers had to design a test rig with two fast motors pulling the specimen at the opposite ends to…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
The High-Temperature (HT) / catalysis / general-purpose ambient pressure cell enables photoemission measurements on catalytic and surface science-type systems at mbar pressures at temperatures up to 1000 C. At the…
The data from 2023 indicates a rapidly growing interest to conduct research at MAX IV. The latest Open Call, which closed in March 2024, received an all-time high of 459…
…only slightly between the three instruments. The beam size at the PXRD2D instrument is about 1.2 mm and can be focused to below 20 µm (vertical) for most energies. The…
…dF/dZ mapping Table with main parameters of the microscope. ** Due to poor control over the tip shape at room temperature, the performance of all ncAFM techniques is not guaranteed….
…Society for Sample Environment (ISSE) and is hosted by the MAX IV Laboratory and the European Spallation Source (ESS), Lund. The focus of the workshop is on two main topics:…