Sample holders
…pins for the use with samples intended for tomographic measurements, as well as flat framed holders for 2D imaging applications. Currently the pins can be offered either made from Aluminium…
…pins for the use with samples intended for tomographic measurements, as well as flat framed holders for 2D imaging applications. Currently the pins can be offered either made from Aluminium…
…(beam size down to 5 micrometer). NOTE: Automated rotational crystallography is still in commissioning and the experiment control in development. This functionality might not be ready in the beginning of…
R3 beam dynamics High-Chromaticity_Optics_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20090902_Updated_Lattice_120614.pdf Internal_Note_20100318_Updated_Lattice_120614.pdf Internal_Note_20100512_Pulsed_Magnet_Injection_120612.pdf Internal_Note_20101101_Updated_Lattice_120614.pdf Internal_Note_20101203_Magnet_Synchronization_120612.pdf Internal_Note_20110117_Updated_Lattice_120612.pdf Internal_Note_20111124_Updated_Lattice_120611.pdf Internal_Note_20121107_Updated_Lattice_140129.pdf Internal_Note_20130724_OCO_Modeling_141009.pdf Internal_Note_20150129_MIK_Analysis_150130.pdf Internal_Note_20150930_MW_Threshold.pdf insertion devices Internal_Note_20090922_Insertion_Devices_for_the_MAX_IV_3_GeV_Storage_Ring.pdf Internal_Note_20100215_Insertion_Devices_for_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20101209_Elliptically_Polarising_Undulators_with_11_mm_Magnetic_Gap_at_the_MAX_IV_3_GeV_Ring.pdf Internal_Note_20111110_Comparison_Brilliance_MAX_IV_NSLS-II.pdf Internal_Note_20111220_Elliptically_polarizing_undulators_for_the_Arpes_beamline_at_the_Solaris_Light_Source.pdf RF cavities Internal_Note_20240410 Harmonic Cavity Parameters for Flat…
…make sure that the motor actions were synchronised. The researchers were a bit overwhelmed by the amount of data they acquired during the experiment. “We learned much more than we…
The Design Office team consists of the following people Design Office Common contact Office location: D110053 E-mail: mechanical@maxiv.lu.se Joaquin Gonzalez E-mail: joaquin.gonzalez@maxiv.lu.se Phone: +46462226511 Linus Roslund Mechanical designer Office location:…
…surf normal) Pressure range 5 x 10-10 – 30 mbar in situ gauge 0.5 mbar – 30 mbar Heaters Direct laser (CW, 1080 nm) Up to 1000C in 10 mbar…
…Li-ion batteries Read all the Highlights in the MAX IV Annual Report 2023. 2023 in numbers: Insights from the MAX IV Annual Report +51% publications compared to 2022. +31% unique…
…keV. It is possible to use either the ‘high energy resolution’ mode, (∆E/E~1e-4, hDCM Si111) or the ‘high intensity’ mode, (∆E/E~1e-2, hMLM) at all three instruments. The beam size varies…
…perform STM characterization of their samples in conjunction with their (spectrocopy) studies at other beamlines. Using vacuum suitcase at SPM lab it is possible to transfer the samples to/from STM…
The ISSE workshop 2024 is the 12th meeting in a series, which was initiated by Michael Meissner in Berlin, 1999. The workshop is held under the patronage of the International…