…be discussed. The goal of this research will be to obtain a scientific and engineering understanding into how microstructure-induced transport mechanisms govern performance. Speaker: Wilson K. S. Chiu, University of…
…beamtime ended. MAX IV User Guide As mentioned there are a lot of things to think about when applying for a beamtime at MAX IV, so we created this handy…
…neutron science. Take the chance to meet with colleagues in the LINXS community! For those of you who are not familiar with how LINXS work, this is an excellent opportunity…
…Undulator, the X-ray beam is cut by a set of slits to define the angular aperture. Then, a set of two mirrors focus the beam first vertically and after horizontally…
…per pulse on sample1% BW >2·10⁶ at 4 keV Repetition rate 10 Hz Harmonic content 1:1000 Bandwidth InSb ∆E/E≈4·10⁻⁴ (1.8-15 keV) ML ∆E/E=0.01 (1.8-15 keV) Monochomator throughput @ 5 keV…
…it would have been possible without your support and engagement. Despite our financial difficulties, we have committed to remain open for business 2024. Looking forward to a new year of…
The MAX IV facility consists of a 3 GeV storage ring, a 1.5 GeV storage ring, and a linear accelerator (fed by two guns) that serves as a full-energy injector to the rings, but also…
…exception of some strong acids that are corrosive to the stainless steel chamber. Sulfur containing electrolytes are also not permitted due to contamination issues. Please contact the beamline to discuss…
…samples can be loaded at the same time. A quick sample transfer from the LL to the RDC is allowed in a pressure of ~5×10-8 mbar, approximately after eight hours…
…needed. – Both standard (parallel-plate, cone-plate, and polycarbonate concentric-cylinder geometries, rectangular torsional DMA fixture) and custom setups. – Combined temperature and humidity control. Extended options list: – Temperature control: Convection…