…Frank Meyer zu Heringdorf, University of Duisburg-Essen, Germany Geoff Thornton, University College London, UK Jeppe Vang Lauritsen (Chair), Aarhus University, Denmark Phil Woodruff, University of Warwick, UK Rachid Belkhou, Synchrotron…
…is the user name you use to log in to DUO or the beamline computers. Enter your password and next you will be prompted for the “otp” code. Go to…
…The committee commended the MAX IV staff for their technical and scientific achievements during 2022. They noted that: ‘The committee is deeply impressed by the profoundness and pace of the…
…DanMAX staff before submitting you proposal requiring the use of gases. The unit is controlled via the control system and the pressures are recorded in the experimental metadata. (Compatible with…
…a plain text format mainly used to store tabular data. CSV means Comma-Separated Values then each value is separated with a comma. Example: Dewar1,MX001,Unipuck,1,HEWL,xtal101,,P43212,77.4,77.4,37.2,90,90,90,,,,,,,,,Lysozyme test crystal This line describes a…
…high photon flux in combination with a good energy resolution available at Bloch was crucial for us since this allowed us to measure extremely efficiently.” Photo: Nick Fewings/Unsplash Publication Krieger,…
…Finland, CSC – IT Center for Service University of Helsinki University of Jyväskylä University of Oulu (Coordinator of FIMAX consortium) University of Turku Åbo Akademi University How to apply for…
…understanding how catalyst structure and composition impact its activity. Ambient-pressure x-ray photoelectron spectroscopy (APXPS) is a powerful in-situ technique that accounts for all of these intertwined factors. Until recently however,…
…still stored as charge. So basically, you have a field-effect transistor, and you write charge on it, and you want that charge to stay even if you switch off your…
…alloys are measured using in-situ experiments at high temperatures [5-7] and/or under tension [8] or compression [9], analyzing the behavior of the hardening phases under such condition in order to…