Programme

…beamline supporting materials science” – Rajmund Mokso, Lund University (SE) 12:00 “Conceptual design for a future diffraction beamline supporting materials science” – Stefan Carlson, MAX IV (SE) 12:15 🥪 Lunch…

User Interface at Balder

…and conditioning of certain devices/servers. Scan number: The scan number is visible on the top-left corner of the plotting widget. This number is appended to all the raw data and…

PyMCA XRF imaging guide

…you should load a good initial configuration where several of the parameters are pre-determined. E.g. detector specific numbers, energy calibration etc. The beamline staff is normally supplying a template or…

User information

…shall open Fill in the start and end dates, and the proposal number. If you do not have a proposal number, please, contact the lab manager first to get one….

MAX IV – Main

Fast Access returns! chevron_right Backed by popular demand, Fast Access beamtime officially returns at MAX IV. Fast Access (also known as “Rapid Access”) is intended for projects that require quick…

Bio & Chem labs

General The Bio & Chem labs at MAX IV are the central laboratory facility for the support of synchrotron experiments that are carried out at various beamlines and also for…

Beamline optics

…Si Roughness (Å) 2.53 2.1 3  3 3 3 – 3 Slope error Sag./Merid. (arcsec) 0.17/0.43 0.03/0.07 0.02/0.04 0.3/0.3 – 0.3/2.5 Entrance arm (mm) 24000     -/∞ 8000 -16037/∞…

Inspecting Processing Results using EXI

EXI provides a web interface to the data collection logs and the results from automated data processing pipelines launched after a data collection is complete. A plot showing the number

Data access and processing

…will be saved with the name scan-####.h5 where #### is a sequential number. It is important to keep track of this number and the corresponding sample/experiment, e.g. by using the…