Fast Access

Types of Fast Access offered at FemtoMAX: Sample or technical feasibility study The maximum number of shifts: 6 (24 hrs). Follow this link to read more about all MAX IV…

Measure energy and power quality

…(renewable power production, wind power etc.) The requirement for follow up and checking of power quality is increasing and a number of different national norms and regulations have been introduced…

User organisations

…2018, consists of: Jonas Weissenrieder, Chair of FASM, KTH Royal Institute of Technology E-mail: jonas@kth.se Maria Hahlin, Uppsala University E-mail: maria.hahlin@kemi.uu.se Leila Lo Leggio, Copenhagen University E-mail: leila@chem.ku.dk Lina Rogström,…

xrdPlanner: a new, versatile beamtime planner

…interface helps users interactively navigate the available geometrical configuration and photon energies to find an optimal layout. Planning and communicating the necessary geometry saves time and allows the beamline staff…

Microscope

…Comparison between STM and ncAFM imaging/resolution Sample: SiC(0001), STM: Vbias = +1.25 V, It = 230 pA AFM: Vbias = 0.00 V, df = -20.1 Hz (f = 28.04 kHz)…

Globus Connect for data transfer

…time you use Globus at MAX IV after October 25, 2023, you will only have a single option to link an identity from MAX IV Laboratory. Otherwise there will be…

STM sampleholders and sample mounting

At STM lab we use an in-house developed sample receiver stage in the PREP chamber manipulator which allows for measuring temperature directly on the sample via a K-type thermocouple (requires…

User information

…should help (especially new users) in preparation of the normal proposals for a later call. The FA at FlexPES is limited at the moment to maximum 2 shifts (8 hours)…