MAX IV Open Day — An enlightening exploration of science
…curiosity and spirit all round. “One person who attended said they were excited about science again for the first time in 47 years. That is what this event was all…
…curiosity and spirit all round. “One person who attended said they were excited about science again for the first time in 47 years. That is what this event was all…
…pinhole (in the black, drop-shaped holder) before it hits the sample (held from the bottom) and then enters through the window into a 15m long flight tube. Credit: Maik Kahnt Publication…
…only slightly between the three instruments. The beam size at the PXRD2D instrument is about 1.2 mm and can be focused to below 20 µm (vertical) for most energies. The…
…(as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as can be done with the mobile ICE endstation). Here is a…
FEA Analysis of ForMAX flight tube. Our primary tool is the CAD software we use. Primarily we are using Solidworks for 3d modelling complemented by Ansys for different FEA analysis….
…or surface reaction are projected by a combination of electric and magnetic fields onto large area position sensitive detectors. From the measured time-of-flight of the particles and their position of…
…mirror analyzers (as at both permanent endstations at FlexPES), or by measurement of the time of flight of the electrons (as will be used with the mobile ICE endstation). Here…
…summer 2023 the vacuum microscope and the flight tube have been installed and are ready for user experiment at room temperature. The liquid nitrogen cooling will the installed and commissioned…
These following items are available to use: 800 nm pump laser; OPA pump 1600 nm – 400 nm; THz generated in organic crystals. 1.8-15 keV X-rays 80 Gs, 36 GHz…
…routinely up to 30 mbar. A small NEXAFS endstation is separated from the beamline by a window and allows pressures up to 1 bar. The talk will discuss the beamline…