LINXS Christmas Open House
Join LINXS at our first Open House and Christmas glögg-mingel on 15th December! When: Drop in at any time from 15.00 to 18.00 Where: LINXS, Scheelevägen 19, Lund, at the…
Join LINXS at our first Open House and Christmas glögg-mingel on 15th December! When: Drop in at any time from 15.00 to 18.00 Where: LINXS, Scheelevägen 19, Lund, at the…
FemtoMAX performance2024 Energy range 1.8 -15 keV (0.8 – 6.8 Å) Photon source 2 x in-vacuum undulators U15 Monochromator Double Crystal Monochromator with InSb(111) crystals. 3 x Multi-Layer Mirror Photons…
DetectorTypeMaximum frame rateActive areaResolution in pxPixel sizeNotes DECTRIS PILATIUS3 X 2M CdTe CdTe based hybrid pixel array detector – photon counting 250 Hz 253.7 x 288.8 mm2 1475 x 1679…
Parameter Value Resolution 4.0 nm at 20kV(High Vacuum) 15 nm at 1kV(High Vacuum) 5.0 nm at 20kV (Low Vacuum) Magnification 6x-300,000x (photo mode) 16x-800,000x (on display) Accelerating voltage 0.3 to…
FemtoMAX offers five different experimental stations that supports x-ray scattering geometries (GIXS, SAXS, WAXS) in a vacuum/He/air environment. X-ray detectors are available directly mounted on vacuum chambers or on a…
…Salts contain negative and positive ions and, for example, table salt, sodium chloride, contains positive sodium ions and negative chloride ions but has a melting point around 800 °C. RTILs…
Photon energy 260 eV – 2500 eV (maximum range) 260 eV – 1800 eV at > 1012 ph/s Resolving power Up to 35000 Spot size 60 µm (h) x 25…
…in-plane with the surface) allowing for Polarization Modulation (PM) IRRAS. Spectrometer Bruker Vertex v70 with in-vacuum beampath Range 1000 cm-1 – 8000 cm-1 (limited by transmission through CaF2 windows) Pressure up…
…lab’. To book the usage of any chemical lab, please use the following link below and book the lab at least 2 weeks in advance. To get access to the…
…OMNY pin sample holders for the NanoMAX Imaging Station. Left: sample pins compatible usable at the NanoMAX imaging station. Sample preparation and mounting is essential for a successful beamtime. Discuss…