STM sampleholders and sample mounting
…SPECS, etc) flat flag-type sampleplate. A number of these sampleplates (stainless steel or molybdenum for high temperatures) is available for users. The samples may be glued to the sampleplate using…
…SPECS, etc) flat flag-type sampleplate. A number of these sampleplates (stainless steel or molybdenum for high temperatures) is available for users. The samples may be glued to the sampleplate using…
…6 days). When considering time needed for experiments, it is recommended to apply either for long experiments (36 or 30 shifts = 6 or 5 full days) or short experiments…
…weaker Ti-C bonds in Ti3C2Tx compared to Ti3AlC2,” adds Näslund. “We could also resolve the crystal-field splitting in titanium of our samples with XANES. Nobody has seen this before.” Crystal-field…
…Denmark (DTU), and Copenhagen University (KU). The first step towards realizing a beamline dedicated to studying “real materials under real conditions in real time” was an infrastructure grant of 35…
There are a number of wireless networks on-site. Here is some information on the differences between the different networks. Available Wireless Network SSIDs maxiv_user Intended for use by visiting scientists…
…is a small cluster that can be used outside beam time by both staff and users. The front end is offline-fe1. The offline cluster is not accessible from the beamline…
…shared resources. There are limits to the maximum number of users who can log in at one time. Therefore, please log out always when you have finished working. There is…
The adoption of sustainable and renewable energy sources to permanently move beyond the dependence on fossil fuels constitutes one of the great challenges of our time. One that is made…
The Government asks a number of referral bodies, including universities, government agencies, and other organisations, to give input and suggestions to their proposed research and innovation politics. Here is a…
…(not yet in operation). For the approximate flux emitted from the undulator, see figure below: Theoretical integrated central-cone flux versus x-ray energy. A number of insertion device gaps are specified…