Beamline optics
…pair (VFM, HFM) Vertical focusing mirror (VFM) At 31.5 m, 3 mrad grazing incidence angle Flat substrate bent to an elliptical cylinder: 0.148 μrad RMS slope error over 200 mm,…
…pair (VFM, HFM) Vertical focusing mirror (VFM) At 31.5 m, 3 mrad grazing incidence angle Flat substrate bent to an elliptical cylinder: 0.148 μrad RMS slope error over 200 mm,…
…are looking at the work function of a sample that has been exposed to air during a couple of months,” explains Mats Fahlman, professor at Linköping University, who is supervising…
…12 to 14 June 2024. This Summer School aims to guide the researchers to effectively put FAIR principles into practice and is open to graduate students, post-docs and young researchers,…
…air to create the ambient conditions, which due to ionisation by the X-rays, acts as the source of charge compensation,” said Esko Kokkonen, postdoc and beamline scientist who assisted in…
Members of the MAX IV Board Professor Robert Feidenhans’l, Director XFEL (Chair) Professor Aleksandar Matic, Chalmers University Anders Holmén, Head of Pharmaceutical Sciences, Astra Zeneca Annika Jenmalm Jensen, Infrastructure Director…
Bruker Vertex v70 FTIR spectrometer coupled to main UHV/APXPS setup (catalysis cell) for Inferred Reflection Absorption Spectroscopy (IRRAS). Fully in-vacuum beampath prevents IR light from absorption by O2/H2O in air….
…= ±12.5 mm, z = 600 mm and 1 motorized rotation: 290° polar angle range Absolute encoders for precise positioning Omicron flag-type sample holders Source LPU 54.4 mm Beam size…
Rather than keep the medal, Mikael decided to donate it to everyone at MAX IV to honour their contributions.“ It would not be fair to keep the medal as it is…
…collisions with residual air molecules are detrimental to the stability and lifetime of the electron beam, therefore the accelerators must operate under ultra-high vacuum (UHV) conditions to reduce the probability…
…preparation is available. Samples must be prepared outside and transferred via air (or inert atmosphere using the glove box). The preparation chamber in the solid-gas endstation can be used for…