Honeycomb borophene: myth or reality?

…researchers found that the material was strongly bound and matched to the topmost metal layer, which in turn was mismatched relative to the underlying metal substrate forming a stoichiometric single-layer…

MXCuBE3 at BioMAX – User Guide

…misaligned. Try running “checkbeam” and “Align beam” from the Beamline actions menu. If neither of them succeeds in recovering the beam, contact staff. The latest measured flux value is used…

Importing sample information list as a CSV file

…exist, it will be created automatically Dewar1 Container name (compulsory) It must match the value engraved in the puck MX001 Container type (compulsory) Only Unipucks are accepted at MAX IV…

Dear user community: CoSAXS beamline is performance ready

…our MAX IV colleague Konstantin Klementiev. It was natural to compare experimental results against these measurements,” said Maik Kahnt, MAX IV beamline scientist. “We could also verify that these simulations…

Sample holders

…or made from Copper but coated with Gold. The top of the pins can be modified to match the specific needs of individual samples. There are three different shapes/sizes of…

Proposal Writing Guide

…get more text in, this will only be to your disadvantage as the referee will notice, and you just gave them even more to read… Make sure you use the…

VPN

…relatively recent version of OpenConnect is needed. The Desktop client is not openly distributed and must be downloaded from MAX IV. For mobile phones, the client is available from the…

Sample environments and equipment

…ideally be smaller than 75 mm (<Ø 150 mm diameter). The distance from the base to the beam should be between 100 mm and 250 mm. Weight: The maximum weight…

Low Density Matter branch

…1 liquid vapor line (under construction) Sample Introduction Chamber Base pressure 10-8 mbar Sample manipulation Magnetic transfer arm to match the manipulator in preparation chamber Sample storage Capacity: 6 samples…