MXCuBE3 at BioMAX – User Guide

…sample changer dewar for each UniPucks in the shipment. Click the Save button after completing this step. Assignment of sample container to position in sample changer dewar.   Once the…

Research projects

…very strong electron pulse compression, Free Electron Laser (FEL) based techniques or a combination of compression and FEL schemes. The proposed project will start by exploring the capabilities in current…

Previous SCIENTÍFika

…with a complex chemistry. Common to all thin-film solar cell technologies is the strong correlation between device performance and nano-structure of the photo-active layer, interfaces and electrodes. With a combination…

Safety requirements for contractors

…are allowed to do in your private home. Ask if you are uncertain! Equipment that is not CE certified (home-built or modified) must be approved by the Electrical and power…

Safety requirements for employees

…you logged in if the accelerator area has several entry points. For the two small accelerator areas (the gun test room and the cavity test room) there is no entry/exit…

Sample environments and equipment

…a vacuum line. Only non-toxic and non-flammable gases are permitted at this time. No sample cells are available at DanMAX, thus users must bring their own sample cell. Please contact…

Prepare sample shipments with EXI at MAX IV

…designated area outside BioMAX (“Dewar departure point”). Please be aware that you need to order the courier yourself and please check that the return address is complete. Let the Delivery…

Sample Environments

…There is also room for sample environments. At this moment there are NO standard beamline provided sample environments. However, plenty of user provided sample environments have been used in the…

PyMCA XRF imaging guide

complicated sample compositions. This guide is not explaining how to use these options. Please read the PyMCA documentation pages. To achieve relative concentrations for comparative analysis, the parameter values on…

Surface & Material Science branch

…on sample (Cu-manipulator head, requires venting, rebuilt and baking) LHe: ~35 K on sample (Mo-manipulator head) On-sample K-type thermocouple sensor for both heads (transferrable with the sample plate) to ensure…