…Coromant. While Fatima Pardo, a Research and Development Engineer at Sandvik Coromant, load samples to the beamline, another R&D Engineer from Sandvik Coromant, Linus von Fieandt, tells about the backstory…
…566 480 (2019). [2] Belopolski, et al., Science 365, 1278 (2019), Liu, et al. Nature Physics 14, 1125 (2018), Guin, et al. Advanced Materials 31 (2019) 1806622, Liu, et al.,…
…39000 47000 27 35 43.5 Incidence Angle 1° 0°- 9° 0°- 12° 1.5° 1.5° 1.5° 1.5° Opt.size (mm), substraite 320 x 10 370 x 10 130 x 10 120…
…with biological agents and safety regulations concerning biological hazards must be followed at all times. 1. Hazards 1.1 Biosafety levels (BSL) MAX IV has the capacity for work with biological…
…access to controlled areas. 1. Access to accelerator areas Accelerator areas constitute controlled areas where the radiation levels can be dangerously high (potentially lethal), particularly near the insertion devices and…
…hours*Distance Hemköp Solbjersvägen 32 Monday – Sunday 8am-10pm 1 km Tram, 2 stops to: “Lund Solbjer” Willys Magistratsvägen 22 Monday – Saturday 7am-10pm Sunday 8am-10pm 1,5 km ICA Nära Tornet…
…simply heating up a few simple compound materials, you can get a very rich behaviour,” says Sandra Benter from the NanoLund Center for Nanoscience at Lund University. In the current…
…The MAC provides advice to the MAX IV Management on the following systems: The injector linac including the electron source and bunch compressors; The 3 GeV storage ring; The 1.5…
…initiative hosting students for secondment periods. Project duration: 2023-2027 https://www.maxiv.lu.se/prismas/ https://cordis.europa.eu/project/id/101081419 ReMade@ARI chevron_right The research infrastructure project ReMade@ARI, which deals with innovative materials for key components in various areas such…
…±12.5 mm, z = 150 mm 1 rotation: -180°…+150° polar rotation Only z and rotation are motorized Magnetic transfer arms (Ferrovac) Sample storage Sample garage with slots for 6 plates…